I Technology and Function
Aluminum Foil Duct Tape is a newly-developed outside anticorrosion protective material with strong selfadhesive and UV resistance property. The product employs plasticizing aluminum foil as the backing material, butyl rubber modified asphalt as the adhesive layer, and antiseize parting film as the cover.
The product is mainly used in the anticorrosion works related to natural gas, petroleum, chemical industry, pharmacy, heating power and oil, gas, water heat transportation in urban construction. Having adopted the flexible and smooth aluminum foil backing material which has excellent qualities in reflecting sun rays and resisting ultraviolet, and butyl rubber modified asphalt of strong anticorrosion and adhesive as the adhesive layer ,the product is free of water, aging, solidification or cracking. In addition it will not change or peel in the long run. Thus it has internal quality of strong anticorrosion, and elegant external appearance, which has been proved in practice.
II Performance Index
Serial NO. | Items | Unit | Index |
1 | Appearance | | Silver |
2 | Film Thickness | mm | 0.50-1.0 |
3 | Adhesive Thickness | mm | 0.50-2.00 |
4 | Total Thickness | mm | 1.0-3.0 |
5 | Tensile Strength | Mpa | ≥100 |
6 | Elongation | % | 800 |
7 | Cutting Property | to Backing Material | N/25mm | ≥50 |
to Aluminum Sheet | Outer Breakage |
8 | Peel Property | N/25mm | ≥40 |
9 | LT Flexibility | （-10℃，20mm，3s，180o） | No Fissuration |
10 | Heat Resistance | （120℃） | Frictiontight |
11 | Dielectric Strength | Mv/m | ≥25 |
12 | Volume Resistivity | Ω.M | 2×1010 |
13 | Water Vapor Transmission Rate（24h） | Mg/cm2 | <0.45 |
14 | Water Absorptivity | % | ≤0.35 |
15 | Temperature Range | ℃ | -34---+110 |
III Application Instruction
1) Surface treatment: Remove rust, welding spatter, burr, oil or filth and keep it clean and
dry. If the rust is removed manually, the effect should reach St3;if mechanically, the effect should reach Sa2 and comply with SYJ4007 86.
2) Primer coating: Specialized matching primer is supposed to be used. During the process keeping it away from the fire, mix it evenly and use clean brush, roller or other mechanical method to coat it. The appropriate primer quantity applied is 12SQM／L by manual coating, and 20SQM／L by mechanical coating.
3) 5 to 10 minutes after the prime coating surface dried, the wrapping can be started.
4) Application Temperature—5℃-+50℃
IV Transportation and Storage
1) Keep it away from insolation, rain, freezing atmosphere, pressing, heat source or open fire.
2) It should be stored or transported in the temperature of -20℃-+35℃ .
3) The storage time is 6 months.
